Cessna Aerobatic RC Airplane! “What’s in the Box Review!”
September 27, 2010
A look at what’s in the Box of the New Cessna EPO Aerobatic Trainer! This is your perfect entry level 4 Channel trainer or aerobatic trainer! Perfect if you are a sport flier as well! Excellent performance! Come check it out at www.bananahobby.com!
Comments
25 Responses to “Cessna Aerobatic RC Airplane! “What’s in the Box Review!””
Got something to say?
1 reason why you should buy this from BananaHobby is because they provide this model with 1000 Meter range radio. Its really nice, i made some mods to mine which made it even better…
I would say the electronics are what yur paying for, therefore really worth the money.
Hey Pete, I bought the one from BH 6 CH BlitzRCWorks 2.4GHz Red Cessna 182T and it says “All spare parts and accessories are available” but every time I call they don’t have any yet or they just don’t reply to email. I hope this one is not like that.
you got alot of nice planes i dont know wich one to chose
sorry wrong boton its like
epo foam look lice plastic
My First mad thing was i thought i was getting the Belt was not because this one this cessna plane is not a Blitz rc But the Radio that Came 2.4 is an Blitz but no Belt the only i could did ..one flight the from thats came the trouble but not in the plane just in the Radio Control but i using the Banana Hobby site to get an answer the only one i got was that the Plane is an Roger no Blitz all about the belt but what about my trouble read my next comments or the comment before..thanks any way
The Video is fantastic ..yes Pete is using abetter Batery that the one i got when i bought the Cessna 182 first later the same batery i got with a full charge even i could fly the plane more than a 4 minutes was discharge so fast i went home Charge the battery again next day i went to the field the radio change the polarity of the Rudder and thrust another problem i decide usin the Banana Hobby Trouble site i have no answer then from that the radio is working exactly i can not use it any more
I’ve got this bird sitting in front of me, waiting for the glue to dry before finishing the build…. BUT I HAVE A BIG QUESTION, when you held up the transmitter you stated the left stick was throttle and rudder? Really? Rudder on the left stick? Is that normal???
The build of this Cessna is pretty straight forward and easy. There is very minimal gluing and everything is included. The glue is in the package as well. Total build time can be as quick as 1 hour from work table to field! (pending you use 5 minute epoxy for glue)
Hey pete, what do i need to do to put this plane together? What needs to be glued and if you can tell me the assembling steps so i can make sure that when i buy this plane i will be able to fly it asap
About 1 hour.
how long did it take to get it built and ready to fly??
Hey pete, I just bought the TW cessna, but I’m having a hard time assembling it. Apparently, this thing is made in china, so the manual is half Chinese and the English is abominable. Not to mention the explanatory diagrams are useless. Could you post a video showing us how to assemble it ??
lol, Thank you!
We can accept orders on our site or on the phone. If you are a complete beginner, try starting with a 3 channel first. It will be a better learning curve.
your awesome man
Hi Pete, wich plane do you recomend for a beginner?, but with all the cool stuff, like 4 channel, 2.4ghz transmitter, brushless motor and lipo battery, im from Mexico, how can i get one, how can i pay?, thanks.
Thanks! Let me know if you have any more questions!
thx for the vid it made my chose easy to pick my dad let me pick my first plane i was looking for 100% RTF under $100 and crash resistant i get it next month
Yes. The only area is the Tail section. Glue is included.
does anything need to be glued
LOL! Thanks for the comment!
We will have the spare parts on our site shortly. The servos, receiver, esc are all separate units. Thanks!
hey what replacement parts are available for this plane and where are they available? also are the servos and reciever on one circuit board or seperate components? thanks
hehe 90 dollars and around 30 dollars shipping is pretty good for this model, it would be kind of funny if you broke the wing while demonstrating how strong the foam is 😛